PDA

View Full Version : Samsung Galaxy S3 International version (GT-I9300) support ?



karapas
30th October 2012, 15:26
Hi guys,

I was wondering whether RIFF JTAG Box supports the international version of Samsung Galaxy S3, i.e. GT-I9300. Thanks!

Cheers,
karapas

mus.me
19th November 2012, 14:08
i dont think so.

raefqadamani
23rd November 2012, 02:07
nice ...i hope new devices is included to the riffbox jtag :)

pdark
30th December 2012, 15:58
i have riffbox and wondering if it is possible to use it on i9300

logicsam
12th January 2013, 15:31
m.youtube.com/#/watch?v=4w-TtGelMwU&desktop_uri=%2Fwatch%3Fv%3D4w-TtGelMwU&gl=IT


Here we see this person running a jtag with riffbox but you can not figure out where he welded the connector on the PBA. Can someone help me it is very urgent. if you can post a wiring diagram cable riff box in the Pba. thanks guys

zoltar1308
19th January 2013, 14:53
when support i9300 international?

iaslam0007
13th April 2013, 06:08
hi master or support team riff box.....
please help me......my Samsung Galaxy S3 International version (GT-I9300) is deadboot....and need me boot phone ...but no pinout image&picture pinout available or modell GT-I9300 in riff box pinout section...
pls help me or learning picture pinout share the here topic ( how the chain setup wired for Samsung Galaxy S3 International version (GT-I9300) for riff box ...for use me and booting up deadbody my galaxy S3...
tnx....

iaslam0007
13th April 2013, 06:09
hi master or support team riff box.....
please help me......my Samsung Galaxy S3 International version (GT-I9300) is deadboot....and need me boot phone ...but no pinout image&picture pinout available or modell GT-I9300 in riff box pinout section...
pls help me or learning picture pinout share the here topic ( how the chain setup wired for Samsung Galaxy S3 International version (GT-I9300) for riff box ...for use me and booting up deadbody my galaxy S3...
tnx....

iaslam0007
13th April 2013, 06:11
hi master or support team riff box.....
please help me......my Samsung Galaxy S3 International version (GT-I9300) is deadboot....and need me boot phone ...but no pinout image&picture pinout available or modell GT-I9300 in riff box pinout section...
pls help me or learning picture pinout share the here topic ( how the chain setup wired for Samsung Galaxy S3 International version (GT-I9300) for riff box ...for use me and booting up deadbody my galaxy S3...
tnx.... I NEED U HOW TO CHAIN SETUP SAMSUNG GALAXY S3 GT-I9300 PINOUT PICTURE FOR SETUP CHAIN WIRED TO S3 FOR RIFF BOX DETECTING....

babak nuri
26th April 2013, 00:18
Hi Guys ..Please Note..... We Can Repair Bricked Phone By Officially Method....(SD_Method)

Plz Read :

babak nuri
26th April 2013, 00:19
Hi Guys ..Please Note..... We Can Repair Bricked Phone By Officially Method....(SD_Method)

Plz Read :


Please Note : About I9300

in this case Jtag Disabled for 90%...So We Need Use SD_Method

in 10% Jtag Access is Possible....And We Have I9300.DLL And RIFF-Box Can Resurrect This Model.....

----
Please Note Again:
** We Can Repair All Bricked I9300 With SD_Method If Phone Bricked By Wrong SW**

* We Can't Repair I9300 if Phone Dead Suddenly*
* We Can't Repair I9300 if Product Name in "Downloading" is empty*
* We Can't Repair I9300 if Odin Say "No Pit Partition" *
* We Can't Repair I9300 if Odin Hang On "Set Partition" *
* We Can't Repair I9300 if Odin Faild Write Any Partition "
* We Can't Repair I9300 if You see "SD card download failed"
-------- All is HW PROBLEM and Needed Replace eMMC ---------

-------
Please Note About Jtaging I9300
if you want check phone for disabled or enabled Jtag Access :
Solder Jtag Wires
Select I9100.dll or Exynus.dll
Goto DCC Read/Write Page
Select Any Size
Press "Read Memory"
if Read Memory Started,I'ts Mean phone is enabled
if You Got error like "self test faild" or No response from riffbox" It's Mean Jtag Disabled
-------
If Any One Have I9300 With Jtag enabled...Please Contact Me or Mr.Legija for dll-------------

About Making Boot on the SD:
We Need Alive Phone With Old Bootloader
if you use alive phone with new bootloader ,Odin Can't Copy Sboot on the SD...So,if you check SD after copy,,,You See SD is empty...
Currect SD Must Blank after Copy Bootloader(Like SD_Magic for I9003)
--------------------------
I Hope all my explain can stop all quistion about this model

----
Last Note: If Any One Need eMMC,,,I Have original eMMC(PreProgramed)
It's Mean Phone Turn One After Replace.
No Need Jtag
No Need SD Method
No Need Flashing Firmware(Phone Compeletly Turn On After Replace)
So,I can Replace eMMC or Sell Only Chip

RALF
28th April 2013, 12:25
One question Bro Babak nuri, whether the sd card with bootloader inside can be used for another i9300 unbrick process ? or it just for one time ? and we need copy the bootloader again to unbrick another phone?

babak nuri
30th April 2013, 11:30
Hi
Of Course Not,,,No Need Create Again.....SD Card Work For Any Times